The Hologram Sticker Printing BRE5059 delivers a distinctive, eye-catching design with a holographic finish. It is frequently used for premium product branding and packaging in sectors including cosmetics, electronics, and alcoholic beverages.
weight | thickness | material | |
Face Material | 65±10%g/m2 ISO 536 | 0.045±10%mm ISO 534 | Holographic PP with sqaure printing |
Liner | 58±10%g/m2 ISO 536 | 0.055±10%mm ISO 534 | Yellow glassine treated with super calender |
Adhesive | A general permanent water-based acrylic adhesive. EP is an adhesive with a high initial viscosity. It has excellent adhesion performance on non-polar surfaces; and has a certain degree of softness, which can be used for direct contact labeling of food, advertising stickers and cosmetics. | ||
Peel adhesion | Initial adhesion 10N/25mm FTM 9 st.st | 20 minutes Peel adhesion value on steel at 180° 8N/25mm FTM 1 st.st | 20 minutes Peel adhesion value on steel at 90° 4-5N/25mm FTM 2 st.st |
Temperature | Min. Appl. Temp. 10ºC | Service Temp. -10ºC+90ºC (after 24hrs) |
Hologram sticker printing finds application in various industries, including security, healthcare, electronics, and consumer goods. They are used to add a unique 3D effect to packaging, provide tamper-evident protection to high-value products, enhance branding and marketing efforts, and prevent counterfeiting.
Printing methods of hologram sticker printing typically involve digital or offset printing techniques that are combined with techniques such as embossing or hot stamping to achieve the holographic effect. Additionally, the use of specialty inks or coatings can enhance the visual impact of the hologram design.
Shelf life
12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:
This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.