Silver BOPP Label FBSPP50-C30ORA

A premium label composed of silver BOPP is the Silver BOPP Label FBSPP50-C30ORA. It is suited for a variety of purposes and compatible with a number of printing techniques.

Get Label Roll Price

Specification of Silver BOPP Label FBSPP50-C30ORA

	weight	thickness	material
Face Material	68±10%g/m² ISO 536	0.05±10%mm ISO 534	Biaxially oriented bright silver polypropylene film with special coating on the surface
Liner	42±10%g/m² ISO 536	0.03±10%mm ISO 534	Biaxially oriented transparent polyester release film
Adhesive	Water removable, acrylic based adhesive. This is a removable adhesive. It has proper initial tack and high resilience. It is designed for recycling applications where the label has to be removed in warm alkaline water. It can be torn and pasted repeatedly on many non-paper substrates without leaving any glue residue.
Peel adhesion	Initial adhesion 7N/25mm FTM 9 st.st	20 minutes Peel adhesion value o nsteel at 180° 6N/25mm FTM 1 st.st	20 minutes Peel adhesion value on steel at 90° 4N/25mm or tear off FTM 2 st.st
Temperature	Min. Appl. Temp. 10ºC	Service Temp. -10ºC±40ºC (24H after labeling)

Applications of Silver BOPP Label FBSPP50-C30ORA

The material has certain tear resistance and chemical corrosion resistance, stable physical and chemical properties, anti-fouling, anti-oil, aluminum layer thickness of 350-400A, has a certain barrier performance, and can be repeatedly pasted on many objects. Removable Performance and efficient washing and removal performance, widely used in beer bottle labeling, etc. Due to the different surface properties of the object to be attached. It is recommended to carry out the label sticking test on the object to be put into use.

The above suggestion, application, and elaboration are not intended as the guarantee of Jinya. All sales of Jinya products shall be tested by customer in the final environment to confirm compliance with the requirements of the use of environment.

Printing Methods of Silver BOPP Label FBSPP50-C30ORA

Corona is required before printing, suitable for most printing methods and inks. It is necessary to test the ink before printing. Note that the temperature during the drying process of the ink should not be higher than 45°C to prevent the reversible curling of the surface material. It is suitable for high-speed overprinting, die-cutting and waste discharge on a rotary machine. Due to the thin substrate, a very sharp die cutter should be used. Excessive tension should be avoided, causing the adhesive to overflow. Static electricity must be prevented or a static elimination device installed on the processing equipment.

Water wash removal test

Take a sample of 50mm*100mm, stick it on the surface of a common beer glass bottle, place it at room temperature for more than 12H, and then soak it in 80-90°C hot water. The label will completely fall off within 60-120S and no adhesive will remain on the bottle.

Shelf life

12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:

This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.

Your Trusted Partner in ADHESIVE LABEL Solution

Provide you with high quality and cost-effective custom labels

Contact



Email:
info@jinyalabel.com



Phone:
+86-18721900056



Address:
Room 610, Block B No 18, Fangsi Road, Songjiang Distrct, Shanghai

Related Sliver Metailized BOPP

Synthetic Sticker Paper FWMPP75-W58O35J

Polyester Sticker Label FCPET50-W58EP

Coated Paper Sticker PSM80-WD58HH

Wine Label GY-W58HM