Private Label Wet Wipes DHTI FBSPET50-W80AD

The reseal function enables the packaging to be used several times without affecting the product's quality, reducing the frequency of disposal and enhancing sustainability.

Get Label Roll Price

Specification of Private Label Wet Wipes DHTI FBSPET50-W80AD

	weight	thickness	material
Face Material	70g / m² ± 10% ISO536	0.050mm ± 10% ISO534	Bright silver polyester film
Liner	80g / m² ± 10% ISO536	0.065mm ± 10% ISO534	white glassine paper with super calender treatment
Adhesive	AD is a removable adhesive with high resilience of appropriate initial viscosity, excellent wetting ability on the surface of the object to be pasted, and good final removability and viscosity. It can be repeatedly torn and pasted on many non-paper stickers without leaving residual glue. The normal temperature range is wide.
Peel adhesion	initial adhesion 6 N/25mm or tear off FTM9	20 mins Peel adhesion value on steel at 180 angle 3.0 N/25mm or tear of fFTM1	20 mins Peel adhesion value on steel at 90 angle 2N/25mm or tear off FTM2
Temperature	Min. Appl. Temp. 5 ºC	Service Temp. -20ºC +60ºC (24H after labeling)

Applications of Private Label Wet Wipes DHTI FBSPET50-W80AD

The product has excellent tensile strength, tear strength, stable physical and chemical properties, opaque, and has certain shading and barrier properties. It has the removable performance of repeated pasting on

many pasted products, and is widely used in special fields such as sanitary napkin sealing paste, kitchen

utensils and household appliances. Due to the different surface properties of the objects to be pasted, it

is recommended to carry out label pasting test on the objects to be pasted before putting them into use. Stable size and chemical corrosion resistance, suitable for making various durability labels. The above suggestion, application, and elaboration are not intended as the guarantee of Jinya. All sales of

Jinya products shall be tested by customer in the final environment to confirm compliance with the

requirements of the use of environment.

Printing Methods of Private Label Wet Wipes DHTI FBSPET50-W80AD

A special coating with printability on the surface is suitable for flexographic, letterpress and other printing

methods and inks. The ink test before printing is necessary. It can be used for high-speed overprinting, die-cutting and waste disposal on the rotary machine. It is necessary to avoid material deformation or

glue failure due to excessive hot knife temperature during processing.

Shelf life

12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:

This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.

Your Trusted Partner in ADHESIVE LABEL Solution

Provide you with high quality and cost-effective custom labels

Contact



Email:
info@jinyalabel.com



Phone:
+86-18721900056



Address:
Room 610, Block B No 18, Fangsi Road, Songjiang Distrct, Shanghai

Related Reseal Label

Repositionable Sticker Paper FWMPP75-W58AD

Private Label Wet Wipes FWMCPP95-W80AD

White Label Wet Wipes FWMCPP80-W80AD

Repositionable Labels FCPP90-W80AD