Desktop Direct Thermal Labels PDT70SL-W58HH

PDT70SL-W58HH are high-quality desktop direct thermal labels that are easy to use and produce high-quality printing results. These labels have excellent adhesion and are available in different sizes, making it ideal for various applications, including product labeling and inventory management.

Get Label Roll Price

Specification of Desktop Direct Thermal Labels PDT70SL-W58HH

	weight	thickness	material
Face Material	70±10%g/m² ISO 536	0.075±10%mm ISO 534	Smooth bright white paper with thermal coating, which is water-oil, scratch- and plasticizer resistant
Liner	58±10%g/m² ISO 536	0.053±10%mm ISO 534	White glassine treated with super calender
Adhesive	This is an adhesive with a high initial viscosity. It has excellent performance on many packaging materials. It can be used for non-direct contact labeling of products such as food, paper weighing and warehousing logistics.
Peel adhesion	Initial adhesion 14N/25mm FTM 9 st.st	20 minutes Peel adhesion value on steel at 180° 18N/25mm or tear off FTM 1 st.st	20 minutes Peel adhesion value on steel at 90° 9N/25mm or tear off FTM 2 st.st
Temperature	Min. Appl. Temp. -5 ºC	Service Temp. -10ºC+65ºC (after 24hrs)

Applications of Desktop Direct Thermal Labels PDT70SL-W58HH

The thermal product is suitable for cold chain. It is recommended to test it before use to avoid any long-term exposure to an environment above 50°C or direct sunlight to protect product quality. The product is suitable for the occasions that are currently sold and discounted. After the label is printed, it cannot be placed in a place that is easily contaminated with animal and vegetable oils or chemicals, so as to avoid the barcode being unscannable.

The above suggestion, application, and elaboration are not intended as the guarantee of Jinya. All sales of Jinya products shall be tested by customer in the final environment to confirm compliance with the requirements of the use of environment.

Printing Methods of Desktop Direct Thermal Labels PDT70SL-W58HH

It can be used for most traditional printing, due to the thermal nature of the product, processing environments above 50°C should be avoided. The ink containing alcohol or volatile organic solvent may damage the thermal layer. It is recommended to use the original ink without any additives for processing and printing as much as possible. For spot color inks or inks with additives, it is recommended to test the inks before printing.

Shelf life

12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:

This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.

Your Trusted Partner in ADHESIVE LABEL Solution

Provide you with high quality and cost-effective custom labels

Contact



Email:
info@jinyalabel.com



Phone:
+86-18721900056



Address:
Room 610, Block B No 18, Fangsi Road, Songjiang Distrct, Shanghai

Related Direct Thermal Label

Direct Thermal Sticker PDT70WB-W58EP

Direct Thermal Label Manufacturer PDT70WS-W50HH

Direct Labels PDT65SL-W40HF

Thermal Direct Shipping Label PDTRPS4L-W50HF